News

  • July 28, 2014 Now it is more convenient to recover data for your customers
    Since now it will be more convenient for your customers to get their data back while you will save time and avoid numerous explanations to understand what files your customer needs to recover first and foremost. It is especially important when the customer's hard disk drive will be bricked soon and you urgently need to know which data the customer needs most of all. With DE Viewer application your customer can set up the priorities for the critical files and folders to be recovered and make some comments for you.
    DE Viewer is a free application which is available for all Data Extractor users and their customers.
    Read more...
  • July 22, 2014 PC-3000 SAS V. 5.7.5 and Data Extractor V. 5.1.15 released

    PC-3000 SAS kernel

    • Added shortcuts for quick start without channel selection
    • Bug fix in the data reading mode for SATA HDD
    • Fixed the progress "overflow" error
    • Redesigned selection of the drives connected to external controllers, 'Refresh' command in the menu now updates the configuration of Windows devices while configuration updated in the Device Manager refreshes the list of drives available for selection
    • Redesigned functionality of the status indicators, added support for the activity of SPTI drives
    Read more...
  • July 07, 2014 The new version of PC-3000 Ver.5.7.12 and Data Extractor Ver.5.1.12 are available.
    Main changes:
    • The operating speed of all HDDs using PIO for getting access to SA is increased in 3-5 times (for the PC-3000 Express and the PC-3000 UDMA-E controllers)
    • The PC-3000 Portable II system has the updated internal firmware which allows to increase the data reading speed. UDMA66 mode is added for the PC-3000 Portable II (earlier only UDMA33 was supported)
    • The new supported families are added for WD Marvell drives. The possibility of working with the 2nd and 3rd copies of Service Area (earlier only copy0 and copy1 were supported) is added
    • Improved password removing algorithm for Hitachi Arm drives for the families with a non-standard Techno Key
    • Changed Boot Code initialization procedure that allows to transform HDD into Boot Code mode without shorting controller pinouts
    • Doubled speed of saving files from "Explorer" mode (by eliminating the saved file cache management and implementing the asynchronous writing into copy)
    • Added "Status" bar that shows the details about the current process (for example: a number of files to copy, the total amount of copied data, the average and instantaneous copy speed, time spent and projected to the end of the process etc.)
    • Improved operation with VMFS, XFS, EXT2(3,4), FAT, NTFS file systems
    Read more...
  • June 10, 2014 Increasing data recovery erudition

    PC-3000 are so deep, highly sophisticated tools that provide many-sided efficient ways to recover data. And it is important to be able to use all the features which PC-3000 has, not just several methods which once worked fine. Here together with our PC-3000 guru you can learn those techniques which other users do not use or even do not know. The higher data recovery erudition you have the more chances to recover data when you have a difficult case and your competitors could not recover it.

    Read more...
  • May 28, 2014 Rewarding the most active Global Solution Centre members
    ACE Laboratory is thankful to all PC-3000 users for their efforts to add the new NAND solutions into our Global Solution Centre. We highly appreciate every minute of your time you spend to share your results.
      
    We have made a decision to nominate and support the PC-3000 Flash users who contributed their efforts to provide the numerous ready solutions for our Global Solution Centre.
    Read more...
  • May 15, 2014 New version 6.5.1 of PC-3000 Flash SSD Edition is released
    New features are available NOW! They are the following:
    • New memory chips with the 16-8 JEDEC and the 16-8 ONFI type of reading have been added
    • New XOR patterns and ECC types have been added
    • New analysis algorithm for the SSS6677 controller has been added
    • the PC-3000 UDMA-E appears in the hardware controller selection while launching the Active Utility mode
    • New ability for adding the user's own ECC description has been added (recommended only for advanced users)
    • New mode for adding elimination based on XOR has been added
    • the ECC auto detection tools have been improved
    • New synchronization method of the "Block's sorting" has been added
    • Matching version mode has been seriously improved
    • A lot of different bug fixes and improvements in Kernel part of the PC-3000 Flash have been done

    For all new users we recommend visiting our F.A.Q. in PC-3000 Flash NAND Forum, where you can find a lot of useful information about the PC-3000 Flash functionality.

    All authorized technical support users can feel free to contact us for getting the latest version of the PC-3000 Flash SSD Edition.
    Read more...
  • April 29, 2014 Japanese version of PC-3000 is launched

    Our developers have completed a new localization of all PC-3000 products.

    Right now, ACE Laboratory is proud to announce that the PC-3000 is available in the Japanese language.

    We thank our official Dealer in Japan - Kumanan PC Net Co., Ltd company which greatly helped us to release the Japanese version of all PC-3000 products and took care not only of the translation issues but of the cultural traditions as well.
    The Japanese version of all PC-3000 products will be exclusively provided by Kumanan PC Net Co., Ltd company within the next year.
    We will add the new features which appear in the scheduled software updates into the Japanese version too.

    Read more...
  • April 14, 2014 Upgrade program for PC-3000 UDMA and PC-3000 SCSI (on the PCI bus)

    All users of the green-colored PC-3000 for Windows UDMA and PC-3000 for SCSI (on the PCI buses) can upgrade their systems according to the upgrade program with 50% discount from the cost of the new systems. Upgrade means the exchange of the old board to the new board starting from the 15th of April, 2014. 

    Contents of the Hardware Upgrade delivery suite

    The PC-3000 UDMA (PCI-E) Upgrade consists of the new PC-3000 UDMA (PCI-E) board, power cables and SATA interface cables.

    The PC-3000 SAS (PCI-E) Upgrade consists of the new PC-3000 SAS (PCI-E) board, power cables and SAS interface cables.

    Read more...
  • April 07, 2014 Training seminars have been successfully conducted in February and March at ACE Laboratory
    ACE Laboratory congratulates all our students with completing the intermediate training courses «PC-3000 Technology for HDD Data Recovery» and «Data Recovery Technologies for SSD and other NAND based drives» and the advanced training course «Seagate recovery course». Students from the USA, Australia, France, Denmark, Hong Kong, Serbia, Spain, Iran and Turkey visited our Training Centre over the last two months.
    Read more...
  • March 20, 2014 A new website with the introduction of all new ACE Laboratory products is released
    We are happy to introduce our new ACE Laboratory products on our new corporate website.
    This year is significant for the development of PC-3000 Technology, as we are launching new lines of the PC-3000 flagship products.

    The PC-3000 Express Professional System, the PC-3000 Express RAID Professional System, the PC-3000 UDMA Professional System, the PC-3000 UDMA RAID Professional System, the PC-3000 SAS Professional System are available.

    Read more...
  • February 04, 2014 New version 6.4.2 of PC-3000 Flash SSD Edition is released
    New features are available NOW! They are the following:
    • New data preparation method of "XOR for page by page number"
    • New data preparation method of "Copying in analysis result"
    • New driver version which is setup automatically in new version of PC-3000 Flash setup *.exe file
    • New memory chips support
    • New features in Active utilities for SSD recovery
    • New database resources
    • Bugfixes and improvements
    All authorized technical support users can feel free to contact us for getting the latest version of PC-3000 Flash SSD Edition.
    Read more...
  • January 28, 2014 The new version of PC-3000 Ver. 5.6 and Data Extractor Ver. 5.1.2 software is available
    Main changes:
    • Added option to initialize translator in RAM for Hitachi-IBM-ARM drives
    • Seagate F3 drives have an improved method of working with system files and modified translator recovery mechanism
    • Added support of the latest families in WD Marvell utility
    • Optimized method for raw recovery in DE
    • Data Extractor RAID Edition has added an option to work in several tasks at the same time
    • Created interactive determinations of RAID parameters
    Read more...
  • December 30, 2013 Merry Christmas and Happy New Year!
    Dear Customers,

    2013 year is almost over and 2014 is coming soon. This year has yielded many positive changes and presented new opportunities we would like to emphasize.

    ACE Lab has made a significant leap by extending its presence in Europe. With a new representative office in Prague we have become closer to our customers and facilitated the process of procurement of PC-3000 products.

    Moreover, we have launched ACE Lab Support Centre that allows us to provide technical support more efficiently at a high level. Our professional technical engineers are at your disposal and you can keep control and manage all your cases very easily. Next year we will continue working hard to make our technical service more efficient and we would be grateful to receive your opinions about any enhancement of our service. Don’t hesitate to contact us at sales@acelab.ru any time.

    During 2013 we have been working hard developing the most powerful PC-3000 products. We have taken into account all your wishes and recommendations about the useful features of PC-3000. ACE Lab wants to say a great Thanks to everyone who shared their own ideas about PC-3000 features as together we have been creating very powerful solutions for your business. Next year will be the year of next generation PC-3000 solutions with the highest speeds and greatest performance. In addition, due to the strong customer demand of becoming proficient in PC-3000 operation and data recovery on the whole, we have decided to conduct new advanced training seminars that will be available next year. 2014 will be a year of new opportunities, high intensity and significant productivity.


    ACE Lab would like to wish you a prosperous Happy New Year. We appreciate your loyalty, testimonials, opinions, recommendations and everything you shared with us. It has been a pleasure to work with you in 2013 and we look forward to working with you in 2014 and contributing to your success.

    Support during holidays:
    Please kindly note that Russia has official public holidays starting from the 31st of December till the 8th of January.

    If you have any urgent technical questions, please call +7909.4358.999 or e-mail ts@acelab.ru

    If you haven't received your license from lic@acelab.ru or activation from activation@acelab.ru, please get it from here or send a license/activation request copy to ts@acelab.ru.
  • December 26, 2013 PC-3000 SAS V. 5.0.2 and Data Extractor V. 4.8.28 released
    PC-3000 SAS kernel
    • PC-3000 SAS software has been redesigned completely to support operations with SAS HDD via the kit 4-channel SAS controller and with SCSI HDD via third party controllers; limited support for SATA, ATA, USB HDD on third party controllers has also been implemented
    • Implemented separate and independent management of 4 SAS ports on the kit SAS controller
    • Implemented management for the 4-channel power supply adapter
    • Implemented launch of PC-3000 SAS utilities and Data Extractor tasks as independent processes in the OS
    • Implemented driver support for 32-bit and 64-bit Windows 7 and Windows 8
    Read more...
  • November 25, 2013 PC-3000 Flash SSD Edition has got a new version 6.4.
    New features are available NOW! They are the following:
    • Full support of Intel SSD drive based on Postville controller (with solution for BAD_CTX, BAD_FW and NO_FW bugs)!
    • New Active Utility for Toshiba SSD drives based on JMF616 controllers
    • Translator for SM3257EN controllers family
    • A lot of new XOR, memory chips, ECC, and other resources!
    • New preparation options for modern flash drives
    • New algorithms for reading problem TLC/MLC chips
    • Serious improvements and optimizations of PC-3000 software components
    All authorized technical support users can feel free to contact us for getting the latest version of PC-3000 Flash SSD Edition
    Read more...

 

If you'd like to receive a quotation, please fill in the form.
Our sales representatives will contact you soon.

Name *:
Company *:
Country *:
E-mail *:
Message:
Antispam: